產品詳情
DNT系列搖臂式臺面點焊機
DNT Series Table Spot Welding Machine
整機特性：
1、 焊接電源可做成交流點焊或中頻逆變直流點焊兩種，可根據(jù)不同的焊接材料選型；
2、 下電極為水平平臺式：焊接范圍大，焊后工件平整、不易變形，焊點下面光滑無痕；
3、 上電極為多關節(jié)搖臂式，焊接方便，不用移動工件，只移動焊槍即可在整個臺面內焊接任何地方；
4、 同時焊接平臺可在200mm范圍內任意升降，方便不同形狀和高度產品焊接；
5、 機器操作桿可做成垂直焊接或杠桿加壓焊接兩種，可對不同的工件選用不同的形式，操作方便，更安全可靠。
主要技術參數(shù)
額定功率：50KVA-200KVA
額定電壓：220V/380V-420V（任選）頻率：50Hz/60Hz
氣源氣壓：≥0.5Mpa;
電極壓力：≥2.2KN；
臺面尺寸：800×1000mm（可定制）；
臺面高度：750-950mm（200mm自動升降）；
焊槍形式：水平式/垂直式（任選一種或兩種）；焊槍總長：395mm（可配垂直式焊槍）；
Main Feathers and Applications
1. There are two types of Welding Power Source : AC Spot Welding or Medium Frequency inverter DC spot welding;
2. The lower welding electrode is designed level flat table:Welding range increased,the welded workpiece stays very flat,not debed,no mark and smooth under welding point;
3. The up welding electrode is designed as Multi-joint arm, welding easily, without moving work piece, only move the welding gun, can weld any b in the range of the down flat table;
4. At the same time in the 200mm range the lower welding flat table can go up and down freely, by this way it is suitable for welding various shape and size of products;
5. Welding Gun can be made in two types: Vertical Welding or Horizontal Welding,choosed according to different workpiece,More easily operating and freely, safe and reliable.
Main Technical Parameters:
Rated Capacity: 50KVA~200KVA,
Input Voltage:220V/380V~480VAC(Optional), 50Hz/60Hz
Air Source Pressure: =0.5Mpa;
Electrode Force: =2.2KN
Welding Table Size:800mm(W) ×1000mm(L);
Welding Table Height: 750~950mm (200mm Stroke);
Welding Gun Type: Horizontal Gun or Vertical Gun
(Optional);
Welding Gun Length: 395mm;
Machine Size : L:1580mm×W:1000mm×H:1900mm;
Machine Weight: 850kg
