產品詳情
EMCtools光纖總線CAN FD
品牌：EMCtools
類型：光纖總線Microbox
型號：CAN FD
德國EMCTOOLS的用于總線信號轉換的光電模塊（FO），包括兩個模塊，分別安置于EMC實驗室（電波暗室及屏蔽室）內部和外部。用于傳輸待測物（DUT）和輔助設備之間的總線信號。這種FO把總線電信號轉換后，以光信號的形式，穿過EMC實驗室。如果使用電纜在實驗室內外傳輸總線信號，電纜穿過EMC實驗室的屏蔽鋼板時，會導致的屏蔽效被破壞。而這種光信號的傳輸方式避免了屏蔽效能被破壞，這樣保證的EMC實驗室在EMC測試過程中，能在EMC實驗室內外正常的傳輸總線信號。此類FO在使用過程中，可以滿足汽車EMC測試標準對于DUT的要求。并以其*佳的EMC性能和極高的通信成功性能，大大節省了用戶調試過程的時間。這使EMC測試得以高效進行。因?yàn)檫@種FO主要應用于汽車EMC領域，需要其具備如下性能：EMI性能——滿足CISPR12 / CISPR25的測試性能要求EMS性能——滿足ISO11451 / ISO11452的測試性能要求ESD性能——部分型號配合ESD保護器，可滿足ISO10605的測試性能要求各大主機廠車輛EMC測試標準（引用以上標準）。
Versions
EMCtools provides different Microbox versions:
1. EMCtools Microbox FlexRay
2. EMCtools Microbox CAN FD (Flexible Datarate)
3. EMCtools Microbox High Speed CAN
4. EMCtools Microbox Low Speed CAN
5. EMCtools Microbox Low Speed Single Wire CAN
6. EMCtools Microbox LIN
7. EMCtools Microbox K-Line (can also be used for L-Line)
8. EMCtools Microbox J1850 (class B – single wire, VPW)
9. EMCtools Microbox J1708
10. EMCtools Microbox SENT
11. EMCtools Microbox RS-232
12. EMCtools Microbox RS-485
Technical data
max. Bitrate: Flexray: 10Mbit/s
CAN FD max. 1 MBit/s (standard CAN)
CAN FD (flexible datarate) max. 10 MBit/s
HS-CAN: max. 1 MBit/s (standard CAN)
CAN FD (flexible datarate) max. 2 MBit/s
LS-CAN: 125 kBit/s
SW LS-CAN: 33 kbit as per J2411 / 100kBis/s in High Speed mode
LIN: 20 kBit/s
K-Line: 10,4 kbit/s
J1850: 10,4 kbit/s
J1708: 9.6 kBit/s
SENT: 30 kBit/s – unidirectional
RS-232: 200 kBit/s
RS-485: 128 kBit/s
signal delay: HS-CAN/CAN FD: typ. 195ns - Setup: 2 x Microbox TJA1044GTJ, 10m fiber optic cable
power supply: 9 – 15V DC, 50mA
fiber optic: F-SMA, standard multimode optical fiber 62,5/125μm or 50/125μm
optional: F-ST connector
bus-connector: 9-pin Sub-D
bus options setting by jumpers:
FlexRay: termination - infinite, 90R
HS-CAN /FD: termination - infinite, 120R, 60R, common mode stabilization network
LS-CAN: termination - 1k, 560R, 390R, 300R, 120R, 100R
LS SW-CAN: termination - 9k1, 3k9, 1k8, 1k, 800R, 270R
LIN: LIN-master (pull-up 1kOhm) or LIN-slave (no pull-up) and bus capacitor 1nF/220pF
K-Line: 510? pull up, Bus capacitor 470pf – 8,4nF selectable in steps
J1850-bus: bus load - additional 1 primary node, 1 – 36 secondary nodes selectable in steps
SENT: Available Input Voltage Threshold VIH: 3.7V, 3.4V, 2.9V, 2.5V, 2.0V (+/- 5%)
RS-232: capacitive bus load 0pF, 470pF and 1nF for TX and RX individually
RS-485: termination - infinite, 60R, 120R, Biased 120R
ambient temperature: storage/operation: -40oC – 85oC (-40 - 185 oF)
品牌：EMCtools
類型：光纖總線Microbox
型號：CAN FD
德國EMCTOOLS的用于總線信號轉換的光電模塊（FO），包括兩個模塊，分別安置于EMC實驗室（電波暗室及屏蔽室）內部和外部。用于傳輸待測物（DUT）和輔助設備之間的總線信號。這種FO把總線電信號轉換后，以光信號的形式，穿過EMC實驗室。如果使用電纜在實驗室內外傳輸總線信號，電纜穿過EMC實驗室的屏蔽鋼板時，會導致的屏蔽效被破壞。而這種光信號的傳輸方式避免了屏蔽效能被破壞，這樣保證的EMC實驗室在EMC測試過程中，能在EMC實驗室內外正常的傳輸總線信號。此類FO在使用過程中，可以滿足汽車EMC測試標準對于DUT的要求。并以其*佳的EMC性能和極高的通信成功性能，大大節省了用戶調試過程的時間。這使EMC測試得以高效進行。因?yàn)檫@種FO主要應用于汽車EMC領域，需要其具備如下性能：EMI性能——滿足CISPR12 / CISPR25的測試性能要求EMS性能——滿足ISO11451 / ISO11452的測試性能要求ESD性能——部分型號配合ESD保護器，可滿足ISO10605的測試性能要求各大主機廠車輛EMC測試標準（引用以上標準）。
Versions
EMCtools provides different Microbox versions:
1. EMCtools Microbox FlexRay
2. EMCtools Microbox CAN FD (Flexible Datarate)
3. EMCtools Microbox High Speed CAN
4. EMCtools Microbox Low Speed CAN
5. EMCtools Microbox Low Speed Single Wire CAN
6. EMCtools Microbox LIN
7. EMCtools Microbox K-Line (can also be used for L-Line)
8. EMCtools Microbox J1850 (class B – single wire, VPW)
9. EMCtools Microbox J1708
10. EMCtools Microbox SENT
11. EMCtools Microbox RS-232
12. EMCtools Microbox RS-485
Technical data
max. Bitrate: Flexray: 10Mbit/s
CAN FD max. 1 MBit/s (standard CAN)
CAN FD (flexible datarate) max. 10 MBit/s
HS-CAN: max. 1 MBit/s (standard CAN)
CAN FD (flexible datarate) max. 2 MBit/s
LS-CAN: 125 kBit/s
SW LS-CAN: 33 kbit as per J2411 / 100kBis/s in High Speed mode
LIN: 20 kBit/s
K-Line: 10,4 kbit/s
J1850: 10,4 kbit/s
J1708: 9.6 kBit/s
SENT: 30 kBit/s – unidirectional
RS-232: 200 kBit/s
RS-485: 128 kBit/s
signal delay: HS-CAN/CAN FD: typ. 195ns - Setup: 2 x Microbox TJA1044GTJ, 10m fiber optic cable
power supply: 9 – 15V DC, 50mA
fiber optic: F-SMA, standard multimode optical fiber 62,5/125μm or 50/125μm
optional: F-ST connector
bus-connector: 9-pin Sub-D
bus options setting by jumpers:
FlexRay: termination - infinite, 90R
HS-CAN /FD: termination - infinite, 120R, 60R, common mode stabilization network
LS-CAN: termination - 1k, 560R, 390R, 300R, 120R, 100R
LS SW-CAN: termination - 9k1, 3k9, 1k8, 1k, 800R, 270R
LIN: LIN-master (pull-up 1kOhm) or LIN-slave (no pull-up) and bus capacitor 1nF/220pF
K-Line: 510? pull up, Bus capacitor 470pf – 8,4nF selectable in steps
J1850-bus: bus load - additional 1 primary node, 1 – 36 secondary nodes selectable in steps
SENT: Available Input Voltage Threshold VIH: 3.7V, 3.4V, 2.9V, 2.5V, 2.0V (+/- 5%)
RS-232: capacitive bus load 0pF, 470pF and 1nF for TX and RX individually
RS-485: termination - infinite, 60R, 120R, Biased 120R
ambient temperature: storage/operation: -40oC – 85oC (-40 - 185 oF)
