產品詳情
Designed for troubleshooting any CAN-based (controller area network) system, the Kvaser Memorator Light HS v2 is an easy-to-use tool for logging serial data, with no software setup required. With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions.
Major Features
- Single high-speed CAN channel (compliant with ISO 11898-2).
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
- Supports bit rates from 50 Kbit/sec up to 1 Mbit/sec.
- Autobaud function determines CAN bus bit rate.
- Always in silent mode - log bus traffic without interfering.
- Fixed 1GB internal storage.
- Two FIFO buffers; one logs all messages on the bus, the other buffer logs approximaby 1000 messages before and after an error frame.
- Built-in real time clock (calendar) with battery backup.
- LEDs alert the user to device status.
The Kvaser Memorator Config Tool provides easy access to the recorded data when connected to the device via a USB port. The tool supports multiple bats used by popular analysis software. In addition, the extrb software allows the user to b and reinitialize the device's memory.
波特率
50-1000 kbps
溫度范圍
-40 - 85 °C
時間戳
2
消息每秒接收
20000 mps
消息每秒發送
20000 mps
重量
150 g
長度
127 mm
高度
22 mm
通道
1
認證
CE, RoHS
接口
USB
分類
Interfaces, Dataloggers, PC INTERFACES, CAN
系統
Linux, Win 7, Win Vista, Win 10, Win 8
連接器
DSUB 9
電流隔離
否
錯誤幀生成
否
錯誤計數器讀取
否
靜音模式
是
材料
PC-ABS
聲響提示
否
