產品詳情
HAMiLab-AS系列微波灰化爐
主要用途：
進行各種有機物和無機物的灰化、磺化、熔融、烘干、臘燒除、熔合、熱處理以及灼燒殘渣、燒失量等的測試
主要配置與性能
1升溫速度快且易控制：快速由室溫程序升溫至1000-1200℃。
2無須炭化直接灰化：省略了樣品放進馬弗爐前蒸發水分、燃燒除去有機物的炭化過程。
3灰化時間短：大部分樣品10分鐘之內就可灰化完全，而普通馬弗爐卻需要幾個小時甚至幾十個小時。
4瞬間冷卻：灰化完成后只需幾十秒即可冷卻，傳統方法需要一個小時甚至更長時間。
5兼容各種傳統坩堝,可配備石英纖維坩堝,使灰化更快速。
6*、安全：內部的安全鎖定機制可在發生意外情況時自動停止儀器運作。
7配備嵌入式微機控制系統，提供手動、自動、恒溫三種操作模式并可自由切換。
8觸摸屏顯示和操作，配備WINDOWS 操作系統，可接PC機；可設置和存儲多條溫控曲線（每條曲線可設40段工藝參數），運行記錄自動存儲，兼容打印機；實時溫度曲線圖顯示，實現加熱過程的動態監控。
9可加工處理對微波耦合程度不同的材料，通用性好。
10設置耐腐蝕排氣通道，可快速排出加熱過程中排放的氣體。
11采用無級可調、高穩定度長壽命連續波、工業級微波源，采用特制熱電偶，在微波場中*測量灰化溫度
12安全可靠的微波屏蔽腔體設計，多重防泄漏保護。
HAMiLab-AS1500微波灰化爐
主要技術參數及性能:
1.電源:220±10V/50Hz;
2.額定功率:1.1KW；
3.微波輸出功率:0.2~1.1KW連續可調；
4.微波頻率:2.45GHz±25MHz
5.*高使用溫度:1200℃；
6.測溫方式:特制熱電偶;
7.測溫范圍:室溫℃~1350℃;
8.*大裝料空間: 150×110×70 mm (深×寬×高)（配置6個30ml的超純石英坩堝）
9.微波腔體：270×310×260 mm (深×寬×高)
10.系統*度:讀數±0.5%;
11.操作界面：5.7寸觸摸屏，bs CE系統
12.控制系統:嵌入式系統,可接PC機,可實現數據存貯和打印功能;可設定多條工藝曲線,每條曲線可設40段工藝參數;手動、自動、恒溫三重模式;
13.微波泄露量:＜1mw/cm2;
14.設備外型尺寸: 550×550×480 mm (長×寬×高)
HAMiLab-AS System
Microwave Ashing Furnace
Main application:
Used for various
organic and inorganic materials ashing, sulphonating, melting, drying, wax burning, fusing, heating and test of
ignition residue, lossShielding="left">Main
configuration and perbance:
1.
Fast heating and easy
to control, programmed to heating
from room temperature to 1000-1200 ℃ within a few minutes.
2.
Direct ashing without
charring: omit the process of evaporating water and burning charcoal to remove
organic matter before putting the sample into the muffle furnace.
3.
Short ashing time:
most samples can be compleby ashed within 10 minutes, while it takes an
ordinary muffle furnace for several or even ten hours.
4.
Instant cooling: the
coolingShielding="left">5.
Compatible with a
variety of traditional crucible, the crucible can be equipped with quartz fiber
for faster ashing.
6.
Accurate, security:
internal security locking mechanism can automatically stop the operation in case
of accident.
7.
Equipped with bded
computer control system, provide 3 operation mode: manual, auto and constant
temperature which can be switched freely.
8.
Touch screen display
and operation, equipped with WINDOWS operating system, can be connected with
PC; can set and store a number of temperature curves (each curve section can be
set 40 process beters), running record is automatically stored, compatible
printer; real time temperature chart display can dynamic monitor the heating
process.
9.
Materials with
different coupling degree with microwave source can be processed-with high
universality.
10.
Set anticorrosion
exhaust way to exhaust gas produced in the heating process quickly.
11.
Using stepless
adjustable, high stability and long lifetime, CW industry level microwave
source to make sure that the system can run continuous and stable for long
time. Using special thermocouple to measure sample temperature directly.
12.
Secure and reliable
microwave shielding chamber design, multi leakage-proof protection.
Specifications for HAMiLab- AS
Microwave System
1.
Power Supply: AC 220V±10V 50Hz
2.
Rated Power: 1.1kW
3.
Microwave Power: 0.2-1.1kW continuous
available
4.
Microwave Frequency: 2450±25MHz
5.
Max. Temperature: 1200℃
6.
Temp. Measurement: special thermocouple
7.
Temp.
9.
Cavity Size: 270(L)×310(W)×260(H)mm
10. System
Accuracy: reading ± 0.5%
11. Operation
Interface: 5.7-inch touch screen, bs CE system
12. Control System:
Embedded system,can be connected with PC, with data memory and printing
function. Several process curves can be set, each curve section can set 40
process beters.Three operation mode: manual, auto and constant temperature.
13. Microwave
Leakage Level: <1mW/cm2
14. Overall
Size: 550(L)×550(W)×480(H)mm
