產品詳情
臥式壓濾機泵@上饒臥式壓濾機泵@臥式壓濾機泵常見問題
Forming a sandwich type of angle layer, the sequence of the slow pre-increase pressure filtration, so that the residual free water in the mud layer to minimize, with the upper and lower two filter bands slowly forward, the upper and lower distance between the two filter bands gradually reduced, the middle of the mud gradually hardened, through the pre-pressure dehydration of large diameter filter rollers, For the mud cake to enter the extrusion dewatering zone smoothly, into the "S" press section, in the "S" type pressing section, the sludge is sandwiched in the middle and lower two layers of filter cloth, after several pressing rollers repeatedly pressed, the upper and lower two filter bands in the staggered rollers bed by the waveb path, due to the two filter bands in the upper and lower b order alternating, the clamping of the mud cake production, The most of the water remaining in the sludge is filtered out, bing the mud cake to dehydrate again, and finally through the scraper will dry mud cake scraping, by the belt conveyor or shaft-free spiral conveyor to the sludge storage. Plate and Frame filter press is the first to be used in chemical dehydration machinery. Although the plate and frame filter press is generally intermittent operation, infrastructure equipment investment is larger, filtration capacity is also low. However, due to its large filtration driving force, high solid rate of filter cake, b filter, high solid recovery rate, conditioning consumption and other advantages, in some small sewage plants are still widely used.
我公司生產的壓濾機入料泵是由我公司與江蘇理工大學流體機械研究所結合各壓濾機使用場合的入料工況，設計開發的壓濾機專用入料泵產品。jdhuiquan4.19
經過各種洗煤、環保、鋁廠、冶煉等場合，其性能已達到國內水平，一經投放市場，其壓濾效果、濾干時間、污水污物的防堵性、無泄漏及整機的穩定性均深受用戶好評。為各類用戶生產環節提益起到了積極的促進作用。
The gravity and wedge strap support rods are made of wear-resistant polyethylene and enhance dehydration by destroying the surface tension of the liquid. The heavy duty 10x frame is welded 3/8 "carbon steel hot dip galvanized. 304 and 316 stainless steel frames are available. Patented lifting institutions in high-speed drainage systems help to improve and reduce plow and component access services. Built-in safety ropes surround the entire system for emergency shutdown. Additional automatic shutdown control allows the system to stop low pneumatic/hydraulic, rough straps are not damaged in the middle or belt, drive failure or belt flushing pressure is low. The fully enclosed cleaning station of the belt filter provides continuous belt cleaning, high-voltage SS nozzles, internal cleaning brushes, special seals to eliminate noise and over-spray, as well as easy maintenance of the overhaul panel. During operation, the variable wedge compression area can be easily adjusted to set the dewatering gap, thus greatly the processing rate and perbance of the material. The replaceable polypropylene discharge blades extend over the entire belt b and are balance heavy. Dry cake emissions are standard.
ZJW型壓濾機入料泵采用獨特的水力設計及葉輪安裝方式，確保了其性能曲線比一般雜質泵更陡，非常適合壓濾機入料時應阻力的變化來實現大流量，低壓力喂料與小流量，高壓力過濾的目的。其特殊的水力性能恰好吻合壓濾機由空腔到填滿再到濾干的漸進過程。喂料初期不用閥門控制流量過大引起的電機過載同時低壓力不會對濾板邊框產生沖擊，減輕了濾板邊框上的濾布的破損，也不會沖擊濾板造成震動，壓濾后期的小流量大壓力不易產生憋泵。尤其是在后期壓榨期時同泵在大壓力下其獨特的葉輪安裝方式及副葉輪的作用，保證軸封處的基本達到無泄漏。
臥式壓濾機泵@上饒臥式壓濾機泵@臥式壓濾機泵常見問題
What are the advantages of manual filter press? As you know, now is an era of the Internet, we understand more knowledge of the way is also through the Internet, he has played a more and more important role in life, we know, the second-hand equipment industry is not very big profit, to long-term in the community to stand up, plate and frame filter, this has become more difficult, But not because of this, we stopped the pace of development, in this era of innovation, in order to long-term foothold, we must make their own strength to play out better, the internet era to a certain extent can play a more b role in this society, because his presence can only increase productivity, reduce labor intensity, of course, More Value Filter Filter Plate This is also a direction of our previous efforts, I believe that often long-term efforts, for the future development of second-hand equipment will also have a deadline, as long as we constantly adhere to their goals and for it to pay their own efforts.
●性能參數：
|
型號 |
轉 速 (r/min) |
流 量 (m3/h) |
揚 程 (m) |
軸功率 (k/h） |
選配電機 功率(kw) |
|
65ZJW-III |
1480 |
27.5 41.4 55.2 69.0 80.0 |
76.0 72.2 66.1 56.0 43.5 |
22.3 |
Y225S-4 30KW |
|
Y225S-4 37KW |
|||||
|
80ZJW-III |
1480 |
40.0 60.0 80.0 100 115 |
76.0 72.2 66.1 56.0 43.5 |
32 |
Y225S-4 37KW |
|
Y225M-4 45KW |
|||||
|
100ZJW-III |
1480 |
56.0 85.0 113 150 169 |
73.3 69.0 62.5 51.2 44.0 |
49 |
Y225M-4 45KW |
|
Y250M-4 55KW |
|||||
|
125ZJW-III |
1480 |
70.0 105 140 186 245 |
73.5 71.6 68.6 61.9 48.5 |
62.5 |
Y250M-4 55KW |
|
Y280S-4 75KW |
|||||
|
125ZJW-III |
1480 |
79.7 119 159 211 279 |
80.0 78.0 74.8 67.5 52.9 |
78.2 |
Y280S-4 75KW |
|
Y280M-4 90KW |
|||||
|
125ZJW-III |
1480 |
58.0 87.0 116 154 203 |
91.8 89.1 85.7 77.3 60.6 |
64.7 |
Y280S-4 75KW |
|
Y280M-4 90KW |
板框壓濾機的液壓體系重點是送上壓力的,當油腔A注油增多時活塞向左活動,濾板使之密閉.當油腔B注油增多時活塞向右活動,濾板松開.由于締造周密,液壓體系障礙較少,只要關注平常愛護就能夠了.由于板框壓濾機在行業的運用工序中其磨損的緣由,常見的液壓障礙還有壓力維持不住和液壓缸推進不適合。造成不能維持壓力的緣故重點有漏油、O形環磨損和電磁閥不正常勞動等,慣用辦理方式是卸下并檢驗閥門、調換O形環、洗刷檢驗電磁閥或板框壓濾機實行調換電磁閥.液壓缸推進不適合是明顯是空氣被封在內部了,這時只要體系抽氣就能夠了,通常能夠快速辦理。在各個行業界限中的運用工序中,板框壓濾機的板塊自身的破損的緣故有:當污泥過稠或干塊遺留時,就會造成供料口的擁塞,此時濾板間沒有了介質只剩余液壓體系自身的壓力,此時板塊自身由于長久間受壓極易造成破損.板框壓濾機的供料不及或供料中含有不適合的固體顆粒時,相同會造成板框自身受力過多以至于破損。
半自動真空熔焊機，超頻真空熱處理設備，加工專機，理化和探傷設備等各類高精細加工檢測設備。設備裝備完全，加工檢測方法完備，在同作業處于搶先方位。產品觸及工礦，城市水，石油化工。
