產品詳情
喂料雜質泵@淄博喂料雜質泵@喂料雜質泵信得過的商家
全自動壓濾機由交替排列的濾板和濾框構成一組濾室。濾板的表面有溝槽，其凸出部位用以支撐濾布。濾框和濾板的邊角上有通孔，組裝后構成完整的通道，能通入懸浮液、洗滌水和引出濾液。板、框兩側各有把手支托在橫梁上，由壓緊裝置壓緊板、框。板、框之間的濾布起密封墊片的作用。由供料泵將懸浮液壓入濾室，在濾布上形成濾渣，直至充滿濾室。濾液穿過濾布并沿濾板溝槽流至板框邊角通道，集中排出。過濾完畢，可通入清洗滌水洗滌濾渣。洗滌后，有時還通入壓縮空氣，除去剩余的洗滌液。隨后打開壓濾機卸除濾渣，清洗濾布，重新壓緊板、框，開始下一工作循環。全自動壓濾機對于濾渣壓縮性大或近于不可壓縮的懸浮液都能適用。適合的懸浮液的固體顆粒濃度一般為10%以下。
一、產品概述
ZJW型壓濾機專用泵本由公司結合各壓濾機生產廠家及使用現場的實際工況，精心設計開發的新一代無泄漏壓濾機專用泵，該產品廣泛應用于壓濾機入料泵應用尤為廣泛，通過在冶金、礦山、電廠、化工等行業中的使用，發現該系列產品具有結構
合理，運行可靠，壽命長等特點。該系列產品采用獨特的水力設計及雙級葉輪的結構，確保了其性能曲線比一般YLB、UHB、HFTK等普通離心泵改造而成的壓濾機入料泵更陡，更適合壓濾機入料的特殊使用工況。jdhuiquan4.19
喂料雜質泵@淄博喂料雜質泵@喂料雜質泵信得過的商家
板框壓濾機的濾板整理不凈時,偶爾會造成介質外泄,一旦外泄,板框邊際就會被沖刷出一道一道的小溝來,介質的審察外泄造成壓力不能抬高,泥餅不能造成。對于經常操作板框壓濾機的工作人員來說，或多或少都會遇到很多意想不到的問題和事情，這些問題一旦得不到及時的解決，很可能會影響板框壓濾機的正常工作。明顯的特征就是，當板框壓濾機的濾布過濾時間有四個月左右時，濾布的滲透力就發生明顯的下降。以下三點能解決滲透力問題：清洗要經常進行清洗，這樣才能保證板框壓濾機的正常工作效率，雖說板框壓濾機本身帶有每周進行循環卸除濾餅的功能，但是因?yàn)闉V布是長時間和過濾液接觸的，而且它們的工作環境是強壓力的，所以就會出現固體附著在濾布上的情況。
二、創新技術特點
1.獨特的密封裝置采用負壓技術加組合密封裝置，在壓力不斷增加而流量逐漸減少的情況下，密封組件不承受壓力，尤其是在后期壓榨期時因泵在大壓力下，其創新密封結構設計，保證軸封處基本達到無泄漏。
2.雙級葉輪的結構設計
該泵采用雙主泵體，雙主葉輪的結構設計，解決了單泵單葉輪泵在入料初期時振動和噪音過大、性能曲線平坦、葉輪流道窄、通過性能差等缺點非常適合壓濾機入料時應阻力的變化來實現大流量低壓力喂料與小流量、高壓力過濾的要求。
3.雙葉輪泵比單葉輪泵抗耐磨性更好
因雙葉輪泵以較低的葉輪出口線速度獲得更高的泵出口壓力從而克服了單葉輪泵為增加壓力而增加葉輪線速度，而導致葉輪、泵殼磨損加劇的缺點，有效的提高水泵等過流部件的壽命。
4.應用范圍廣
該產品可采用鑄鋼、高鉻鑄鐵（耐腐耐磨材料）、不銹鋼等多種材質制造，可適合不同的介質需求，用戶選用的范圍更廣。
5.葉輪與泵壁的間隙可調
獨特的軸承箱設計，用戶在常時間使用后，因磨損造成壓力下降時，可通過調整葉輪與泵壁的間隙來繼續保障水泵的高壓力，提高了水泵的使用壽命、延長了大修周期，克服了傳統單葉輪壓濾泵因磨損壓力下降快，經常更換葉輪使用壽命短等缺點。
喂料雜質泵@淄博喂料雜質泵@喂料雜質泵信得過的商家
Sludge filter machine and other sludge treatment equipment and sludge treatment costs become the main investment, therefore, the purchase of sludge filter machine not only to see the sludge filter itself, but also to consider the use of it to deal with the cost of sludge treatment, the use of plate frame filter machine treatment of the same sludge, the need for 100-180 yuan. For large sludge disposal projects with hundreds of tons of sludge daily treatment, there will be millions of differences in sludge treatment costs each year. Sludge Treatment degree today, the relevant environmental protection laws and regulations stipulate that sludge treatment to less than 60% water content can be landfill or resource utilization, therefore, sludge filter machine when purchasing, we must ensure that the type of sludge treatment equipment treated sludge water content standards. This is also the first factor to be considered in the purchase of sludge filter press. At present, the market has ordinary sludge filter press, there is also ultra-high pressure sludge deep dewatering filter press, for the long-term consideration of sludge disposal works, it is recommended to buy sludge deep dewatering equipment. Sludge treatment efficiency has many sewage treatment plants or industrial enterprises. Because the processing capacity of sludge treatment equipment can not reach the amount of sludge production, often resulting in sludge accumulation situation. Sludge treatment efficiency varies greatly depending on the same type of sludge filter machine produced by different sludge treatment equipment suppliers
三、性能參數表
|
型號 |
轉 速 (r/min) |
流 量 (m3/h) |
揚 程 (m) |
軸功率 (k/h） |
選配電機 功率(kw) |
|
65ZJW-III |
1480 |
27.5 41.4 55.2 69.0 80.0 |
76.0 72.2 66.1 56.0 43.5 |
22.3 |
Y225S-4 30KW |
|
Y225S-4 37KW |
|||||
|
80ZJW-III |
1480 |
40.0 60.0 80.0 100 115 |
76.0 72.2 66.1 56.0 43.5 |
32 |
Y225S-4 37KW |
|
Y225M-4 45KW |
|||||
|
100ZJW-III |
1480 |
56.0 85.0 113 150 169 |
73.3 69.0 62.5 51.2 44.0 |
49 |
Y225M-4 45KW |
|
Y250M-4 55KW |
|||||
|
125ZJW-III |
1480 |
70.0 105 140 186 245 |
73.5 71.6 68.6 61.9 48.5 |
62.5 |
Y250M-4 55KW |
|
Y280S-4 75KW |
|||||
|
125ZJW-III |
1480 |
79.7 119 159 211 279 |
80.0 78.0 74.8 67.5 52.9 |
78.2 |
Y280S-4 75KW |
|
Y280M-4 90KW |
|||||
|
125ZJW-III |
1480 |
58.0 87.0 116 154 203 |
91.8 89.1 85.7 77.3 60.6 |
64.7 |
Y280S-4 75KW |
|
Y280M-4 90KW |
喂料雜質泵@淄博喂料雜質泵@喂料雜質泵信得過的商家
Hydraulic compb is a hydraulic station through the rack of the hydraulic cylinder components to promote the compb plate compression. The two beams connect the thrust plate and the compb device together to b the rack, the press on the rack and the clamping device are connected, and the filter plate and the filter frame are arranged alternaby between the thrust plate and the clamping plate, and the filter medium is clamped between the filter plate and the filter frame, and the compb device pushes the clamping plate, presses all the filter plates and the filter frame in the rack, and after reaching the rated compb force, Can be filtered. Suspension from the feed hole on the thrust plate into the filter chamber (filter frame and adjacent filter plate to b the filter chamber), solid particles are filtered by the filter medium in the filter room, the filter through the medium, from the liquid hole out of the machine. The liquid of the filter press has two bs, the b flow and the undercurrent, filter from each filter plate out of the liquid hole directly discharged from the machine outside the call flow, the b flow type is convenient for each filter plate filtration situation, found that a filter plate filter is not pure, you can close the plate out of the liquid mouth; If the filter of the filters converge from an outlet pipe out of the machine, it is called the undercurrent type.
在公司翻開強健的20年里，咱們?yōu)榭蛻艄┙o更好的產品，超卓的技能支撐，健全的售后效能，假設您對我公司的產品效能有喜好，請?jiān)诰€留言或許來電咨詢。
