產品詳情
壓濾機給料泵@安陽壓濾機給料泵@壓濾機給料泵柴油機傳動
Sludge filtration dehydration is driven by the pressure difference on both sides of the filter medium, so that the sludge moisture is forced to b the filter through the filtration medium, and the solid particles are intercepted on the medium to b a filter cake, so as to achieve the purpose of sludge dehydration. Sludge filter machine is a mechanical force on the side of the filter medium to achieve filtration machinery, mainly used for sludge (water) solid-liquid separation. Sludge filter machine is mostly used in papermaking, starch, alcohol, vitamin C Engineering and other industries of industrial sludge dewatering water sludge, through the sludge pump to the sludge mixing tank, while adding coagulant for full mixing reb, and then into the belt sludge pressure cloth mud, sludge evenly distributed to the gravity dewatering zone, and in the two-way channeling and gravity of the mud rake, With the movement of the Dewatering filter belt, the sludge quickly takes off the free water of the sludge. Due to the long design of gravity dewatering zone, maximum gravity dehydration is achieved. The flipped sludge enters the ultra-long wedge-shaped pre-pressure dewatering area to remove the sludge from the gravity zone slowly.
我公司生產的壓濾機入料泵是由我公司與江蘇理工大學流體機械研究所結合各壓濾機使用場合的入料工況，設計開發的壓濾機專用入料泵產品。jdhuiquan4.19
經過各種洗煤、環保、鋁廠、冶煉等場合，其性能已達到國內水平，一經投放市場，其壓濾效果、濾干時間、污水污物的防堵性、無泄漏及整機的穩定性均深受用戶好評。為各類用戶生產環節提益起到了積極的促進作用。
操作壓力一般為0.3～0.6兆帕，特殊的可達3兆帕或更高。過濾面積可以隨所用的板框數目增減。板框通常為正方形，濾框的內邊長為320～2000毫米，框厚為16～80毫米，過濾面積為1～1200米2。板與框用手動螺旋、電動螺旋和液壓等方式壓緊。板和框用木材、鑄鐵、鑄鋼、不銹鋼、聚丙烯和橡膠等材料制造。全自動壓濾機主要由止推板(固定濾板)、壓緊板(活動濾板)、濾板和濾框、橫梁(扁鐵架)、過濾介質(濾布或?yàn)V紙等)、壓緊裝置、集液槽等組成，其中過濾介質和集液槽由用戶自備。全自動壓濾機有手動壓緊、機械壓緊和液壓壓緊二種形式。手動壓緊是螺旋千斤頂推動壓緊板壓緊；機械壓緊是電動機配H型減速箱，經機架傳動部件推動壓緊板壓緊；
ZJW型壓濾機入料泵采用獨特的水力設計及葉輪安裝方式，確保了其性能曲線比一般雜質泵更陡，非常適合壓濾機入料時應阻力的變化來實現大流量，低壓力喂料與小流量，高壓力過濾的目的。其特殊的水力性能恰好吻合壓濾機由空腔到填滿再到濾干的漸進過程。喂料初期不用閥門控制流量過大引起的電機過載同時低壓力不會對濾板邊框產生沖擊，減輕了濾板邊框上的濾布的破損，也不會沖擊濾板造成震動，壓濾后期的小流量大壓力不易產生憋泵。尤其是在后期壓榨期時同泵在大壓力下其獨特的葉輪安裝方式及副葉輪的作用，保證軸封處的基本達到無泄漏。
壓濾機給料泵@安陽壓濾機給料泵@壓濾機給料泵柴油機傳動
What are the advantages of manual filter press? As you know, now is an era of the Internet, we understand more knowledge of the way is also through the Internet, he has played a more and more important role in life, we know, the second-hand equipment industry is not very big profit, to long-term in the community to stand up, plate and frame filter, this has become more difficult, But not because of this, we stopped the pace of development, in this era of innovation, in order to long-term foothold, we must make their own strength to play out better, the internet era to a certain extent can play a more b role in this society, because his presence can only increase productivity, reduce labor intensity, of course, More Value Filter Filter Plate This is also a direction of our previous efforts, I believe that often long-term efforts, for the future development of second-hand equipment will also have a deadline, as long as we constantly adhere to their goals and for it to pay their own efforts.
●性能參數：
|
型號 |
轉 速 (r/min) |
流 量 (m3/h) |
揚 程 (m) |
軸功率 (k/h） |
選配電機 功率(kw) |
|
65ZJW-III |
1480 |
27.5 41.4 55.2 69.0 80.0 |
76.0 72.2 66.1 56.0 43.5 |
22.3 |
Y225S-4 30KW |
|
Y225S-4 37KW |
|||||
|
80ZJW-III |
1480 |
40.0 60.0 80.0 100 115 |
76.0 72.2 66.1 56.0 43.5 |
32 |
Y225S-4 37KW |
|
Y225M-4 45KW |
|||||
|
100ZJW-III |
1480 |
56.0 85.0 113 150 169 |
73.3 69.0 62.5 51.2 44.0 |
49 |
Y225M-4 45KW |
|
Y250M-4 55KW |
|||||
|
125ZJW-III |
1480 |
70.0 105 140 186 245 |
73.5 71.6 68.6 61.9 48.5 |
62.5 |
Y250M-4 55KW |
|
Y280S-4 75KW |
|||||
|
125ZJW-III |
1480 |
79.7 119 159 211 279 |
80.0 78.0 74.8 67.5 52.9 |
78.2 |
Y280S-4 75KW |
|
Y280M-4 90KW |
|||||
|
125ZJW-III |
1480 |
58.0 87.0 116 154 203 |
91.8 89.1 85.7 77.3 60.6 |
64.7 |
Y280S-4 75KW |
|
Y280M-4 90KW |
板框壓濾機的濾板整理不凈時,偶爾會造成介質外泄,一旦外泄,板框邊際就會被沖刷出一道一道的小溝來,介質的審察外泄造成壓力不能抬高,泥餅不能造成。對于經常操作板框壓濾機的工作人員來說，或多或少都會遇到很多意想不到的問題和事情，這些問題一旦得不到及時的解決，很可能會影響板框壓濾機的正常工作。明顯的特征就是，當板框壓濾機的濾布過濾時間有四個月左右時，濾布的滲透力就發生明顯的下降。以下三點能解決滲透力問題：清洗要經常進行清洗，這樣才能保證板框壓濾機的正常工作效率，雖說板框壓濾機本身帶有每周進行循環卸除濾餅的功能，但是因?yàn)闉V布是長時間和過濾液接觸的，而且它們的工作環境是強壓力的，所以就會出現固體附著在濾布上的情況。
強悍的出產才調確保了產品繁復的規范品種，活絡的營銷方法確保了產品快速應用到客戶的實踐出產中，深受化工，石油，石油化工，環保，給排水，冶金，電力，造紙，印染，海水淡化，食物釀酒。
