產品詳情
我要找p液下泵規格型號A路北p液下泵規格型號
4，渣漿泵的軸承水壓和水量都要契合有關的技能規則，操作時也應隨時依據工作狀況調整或替換填料的松緊程度，不然也許致使軸封漏漿的狀況呈現。別的，對渣漿泵的軸承及時替換軸套也有一樣的含義。5，渣漿泵的軸承假如需求替換，則一定要確保軸承組件內無塵埃，潤滑油清洗，一起，在渣漿泵工作過程中軸承的溫度通常應保持在60℃到65℃，最高也不該超越75℃，不然即為異常狀況。
一、產品概述SP液下渣漿泵為立式離心液下渣漿泵，浸入液下，用于輸送磨蝕性、粗顆粒、高濃度渣漿。不需要任何軸封和軸封水，在吸入量不足的工況下也能正常工作。
SP型液下渣漿泵過流部件由耐磨金屬制成。
根據渣漿池液面的高低，可選擇不同長度的泵傳動軸或吸入管。
采用多種速度和多種變型方式，使得泵在最佳工況下運行，使用壽命長，運行效益高，能滿足多類惡劣的輸送條件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
我要找p液下泵規格型號A路北p液下泵規格型號
一，盡可能地選用低轉速渣漿泵雖然高轉速泵可以減小泵的體積和進步功率，但有些高轉速泵由于規劃制作問題很難順應高速工作的要求，工作不變性差，其操作壽數較短，故從工作方面思考，為了減少停機損失和耽擱工作壽數，仍是選用低轉速泵較為有利。
五、型號意義
40 PV-SP
40----------吐出口徑40mm
PV--------- PV型軸承組件
SP----------液下泵
水泵安裝
泵安裝的好壞對泵的運行和壽命冇重要影響，所以安裝和校正必須仔細進行。泵的外形及安裝尺寸。
