產品詳情
搜一搜sp液下泵公司介紹A盧龍sp液下泵公司介紹
又是一年暑季到，三伏天使用液下渣漿泵的小妙招您知道嗎？不懂的讓小編慢慢向您到來。液下渣漿泵為懸臂式，液面以下無機械密封，無軸承結構，這樣結構簡單相對于液下排污泵液面以下有軸套，機械密封的泵減少了泵的維修次數，延長液下渣漿泵使用期限，因?yàn)榻Y(jié)構合理，所以省心省力，但在使用過程中也需要我們認真對待。
一、產品概述SP液下渣漿泵為立式離心液下渣漿泵，浸入液下，用于輸送磨蝕性、粗顆粒、高濃度渣漿。不需要任何軸封和軸封水，在吸入量不足的工況下也能正常工作。
SP型液下渣漿泵過流部件由耐磨金屬制成。
根據渣漿池液面的高低，可選擇不同長度的泵傳動軸或吸入管。
采用多種速度和多種變型方式，使得泵在最佳工況下運行，使用壽命長，運行效益高，能滿足多類惡劣的輸送條件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
搜一搜sp液下泵公司介紹A盧龍sp液下泵公司介紹
就必須及時調整葉輪與前護板的間隙，金屬內襯泵葉輪與前護板間隙在之間，橡膠內襯泵葉輪與前后護套之間的間隙是相等的。調節葉輪間隙時首先要停泵，松開壓緊軸承組件的螺栓，擰緊調整螺栓上的螺母，使軸承組件向前移動，同時用手傳動軸按泵傳動方向旋轉直到葉輪與前護板摩擦為止對于金屬內襯泵則將前面剛擰緊的螺母放松半圈，然后將調整螺栓上前面的螺母擰緊，使軸承組件后移此時葉輪與前護板間隙在之間。為了保證渣漿泵的高效運行對于橡膠內襯泵則通過擰調整螺栓上的螺母綜上所述是關于渣漿泵葉輪的調節，渣漿泵的葉輪是渣漿泵運行工作中最重要的元件,如果葉輪發生故障磨損將直接影響到水泵的工作。
五、型號意義
40 PV-SP
40----------吐出口徑40mm
PV--------- PV型軸承組件
SP----------液下泵
水泵安裝
泵安裝的好壞對泵的運行和壽命冇重要影響，所以安裝和校正必須仔細進行。泵的外形及安裝尺寸。
