產品詳情
我要找液下渣漿泵廠家A峰峰礦液下渣漿泵廠家
3，調查泵的安裝基礎是不是現已穩固，一切各部件螺栓是不是擰緊，4，中止作業時，應先中止電動機，然后閉上壓力表旋塞，5，泵長期中止運行時，應將泵拆開，擦洗干凈，涂上防銹油妥善保留，6，起動電機，翻開壓力表旋塞，當泵以全轉數作業時，調節閘閥開度到需要規模。
一、產品概述SP液下渣漿泵為立式離心液下渣漿泵，浸入液下，用于輸送磨蝕性、粗顆粒、高濃度渣漿。不需要任何軸封和軸封水，在吸入量不足的工況下也能正常工作。
SP型液下渣漿泵過流部件由耐磨金屬制成。
根據渣漿池液面的高低，可選擇不同長度的泵傳動軸或吸入管。
采用多種速度和多種變型方式，使得泵在最佳工況下運行，使用壽命長，運行效益高，能滿足多類惡劣的輸送條件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
我要找液下渣漿泵廠家A峰峰礦液下渣漿泵廠家
對于渣漿泵相信大家是有所了解的，在使用的時候可能需要排油，下面就為大家介紹渣漿泵的排油步驟：1，如果要把渣漿泵箱體中的油全部排掉，可以擰下箱體下部的放油塞，將油排掉。2，渣漿泵在外排油的情況下，液面距離油箱頂板高度不要超過30毫米，以保證泵內各軸承的潤滑和冷卻，當千斤頂工作腔容積過大時，需另設付油箱，保證外排油后的液面最低高度不小于100毫米以免吸空。
五、型號意義
40 PV-SP
40----------吐出口徑40mm
PV--------- PV型軸承組件
SP----------液下泵
水泵安裝
泵安裝的好壞對泵的運行和壽命冇重要影響，所以安裝和校正必須仔細進行。泵的外形及安裝尺寸。
