AdaptARC機(jī)械化焊接設(shè)備
ORBITAL WELDING THAT IS ENGINEERED FOR VERSATILITY
The AdaptARC automated welding machines offer the most advanced orbital and linear pipe welding systems for the professional welder. Designed for durability and versatility, the AdaptARC system offers multiple processes for Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding pulsed spray (GMAW-P) and short arc (GMAW-S), and Flux Core Arc Welding (FCAW).
Tri Tool's mechanized orbital pipe welding systems are built to provide total control with dynamic configuration options...
- Degree, Time, or Distance Programming
- Precision, User Defined Seam Tracking
- Two Shielded Gas Inputs
- One System with Multiple Processes: GTAW, GMAW-S, GMAW-P, and FCAW
- Wire Speeds up to 700 Inches per Minute
- Digital Control for Consistent Accuracy
- Each Track Handles 3 Pipe Sizes
- Patented Quick-Change Torch that is Rated at 350 Amps
- Automatic Torch Height Control
Tri Tool's new orbital automated welding machines are designed from the ground up to deliver the superior precision, control, dependability, and ease-of-use that customers worldwide have come to expect.
PRECISION MULTI PROCESS WELD HEAD WITH
ORBITMASTER - ADVANCED PROGRAMMABLE WELDING ARC CONTROLLER FOR YOUR AUTOMATED WELDING MACHINES
Chaining and bing programs together allows the next program to begin at the end of the previous program. You can create a program that will put the root, hot pass, fill layers, and cap without stopping, shortening overall automated welding time.
You can also loop programs to allow the same program to repeat multiple times allowing repeat processing of across similar characteristics to continue uninterrupted.
Reduce technical support costs by operating an automated welding machine with full digital controls eliminating frequent calibration required on other systems, saving precious time on the job.
|
WELDER FRIENDLY PENDANTExtremely small, light weight and rugged the control pendant was designed by welders for welders. It features a high-low switch which allows simultaneous switching of primary/background beters allowing for easier operations. |
|
NONSTOP WELDING FROM ROOT TO CAP
|
|
DUAL INLET GAS PORTS TO MINIMIZE DOWNTIMEThe system comes standard with two gas ports. Use one for GTAW or GMAW-S root welds and the other for GMAW-P or FCAW to product the fill and cap. The program line commands the ports to switch automatically, purging the lines during re-wrap, resulting in no lost weld time. |
|
REDUCE NEED FOR FREQUENT E-TECH SUPPORTReduced E-tech support costs; fully digital control system eliminates frequent calibration required on other systems. |
|
QC COMPLIANCE MONITORING &
|
|
OFF-THE-SHELF PARTSReduce the cost of expensive 'proprietary' parts with many welding consumables that can be found in any welding supply store. Parts can be found in hours or minutes instead of days or weeks. |
