#include "absacc.h"
#include "intrins.h"
//自定義庫 在"C:\comp51\UserLib\"文件夾中
#include ".\inc\ASCII816.h" //標準ASCII庫
#include ".\inc\HZTable.h" //漢字點陣庫(自做)
#include ".\inc\Menu.h" //菜單庫(自做)
// LCD128*64 數據線
#define LCD12864DataPort P1
// LCD128*64 I/O 信號管腳
sbit di =P3^1; // 數據\指令 選擇
sbit rw =P3^3; // 讀\寫 選擇
sbit en =P3^2; // 讀\寫使能
sbit cs1 =P3^4; // 片選1,低有效(前64列)
sbit cs2 =P3^5; // 片選2,低有效(后64列)
sbit reset=P0^7; // 復位
/*----------------------------------------------------------------------------------------------------*/
/* ****函數列表****
//開關顯示
void SetOnOff(unsigned char onoff)
//選擇屏幕
//screen: 0-全屏,1-左屏,2-右
void SelectScreen(unsigned char screen)
//清屏
//screen: 0-全屏,1-左屏,2-右
void ClearScreen(unsigned char screen)
//顯示8*8點陣
//旋轉90度:字模被豎著切分
//lin:行(0-7), column: 列(0-15)
//address : 字模區首地址
void Show88(unsigned char lin,unsigned char column,unsigned int address)
//顯示8*16字符
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//character:字符代碼(標準ASCII碼)
void ShowChar(unsigned char lin,unsigned char column,unsigned char character)
//顯示8*16字符串
//!!!只能顯示在一行上即: 串長+column <=15
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//address : 字模區首地址
void ShowString(unsigned char lin,unsigned char column, unsigned char *string)
//顯示一個漢字
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//hzcode: 漢字代碼(自定義的)
void ShowHZ(unsigned char lin,unsigned char column,unsigned int hzcode)
//顯示圖片
//旋轉90度 :字模被豎著切分
//startline :開始行
//startcolumn:開始列
//linechar :圖片行點除8(圖片以8*8點陣為單位)
//columnchar :圖片列點除8(圖片以8*8點陣為單位)
//address : 字模區首地址
void ShowPicture(unsigned char startline,unsigned char startcolumn,unsigned char linechar,unsigned char columnchar,unsigned int address)
//!!問題大戶
//顯示一行漢字
//lin:行
//lineheadaddr: 此行漢字代碼區首地址
void ShowLine(unsigned char lin,unsigned int lineheadaddr)
//顯示一屏漢字
//pageheadaddr:此屏漢字代碼地址區首地址
void ShowPage(unsigned int pageheadaddr)
//反顯一個8*8字塊
//lin:行(0-3), column: 列(0-7)
void ReverseShow88(unsigned char lin,unsigned char column)
//反顯一個字符
//lin:行(0-4), column: 列(0-15)
void ReverseShowChar(unsigned char lin,unsigned char column)
//反顯一個漢字
//lin:行(0-3), column: 列(0-7)
ReverseShowHZ(unsigned char lin,unsigned char column)
//反顯一行漢字
//lin:行
ReverseShow(unsigned char lin)
//初始化LCD
void InitLCD()
****函數列表結束**** */
/*----------------------------------------------------------------------------------------------------*/
/*--基本函數源程序------------------------------------------------------------------------------------*/
//延時
Lcd12864delay()
{
unsigned int i=500;
while(i--) {;}
}
/*----------------------------------------------------------------------------------------------------*/
//狀態檢查
void CheckState()
