CPLD的程序如下：
Library IEEE;
Use IEEE.STD_LOGIC_1164.all;
Use IEEE.STD_LOGIC_unsigned.all;
Use IEEE.std_logic_arith.all;
ENTITY PCI IS
PORT（
ADS:IN STD_LOGIC;
LCLK:IN STD_LOGIC;
LWR:IN STD_LOGIC;
LHOLD:IN STD_LOGIC;
LHOLDA:OUT STD_LOGIC;
READY:OUT STD_LOGIC;
OE:OUT STD_LOGIC;
RW:OUT STD_LOGIC);
END PCI;
ARCHITECTURE PCI_arch OF PCI IS
SIGNAL signal_0:STD_LOGIC;
BEGIN
PROCESS(LCLK)
BEGIN
IF LCLK'EVENT AND LCLK='1'THEN
IF LHOLD='1'THEN
IF ADS='0'THEN
Signal_0<='1';
ELSIF ADS='1'THEN
Signal_0<='0';
END IF;
END IF;
END IF;
IF LCLK'EVENT AND LCLK='1'THEN
IF LHOLD='1'THEN
IF LWR='0'THEN
OE<='0';
RW<='1';
ELSIF LWR='1'THEN
OE<='1';
RW<='0';
END IF;
END IF;
END IF;
IF LCLK'EVENT AND LCLK='0'THEN
IF LHOLD='1'THEN
IF signal_0='1'THEN
READY<='0';
ELSIF signal_0='0'THEN
READY<='1';
END IF;
END IF;
END IF;
END PROCESS;
PROCESS(LCLK,LHOLD)
BEGIN
IF LCLK'EVENT AND LCLK='0'THEN
IF LHOLD='1'THEN
LHOLDA<='1';
ELSIF LHOLD='0'THEN
LHOLDA<='0';
END IF;
END IF;
END PROCESS;
END PCI_arch;
5 結束語
本文介紹的DSP與PCI總線的接 接方案靈活簡單，減小了布板的復雜度，簡化了PCI總線要求的時序，縮短了開發周期。采用該方案設計的數據處理系統工作穩定，已應用在低頻信號檢測領域中。
