產(chǎn)品詳情
| 是否進(jìn)口 |
否
|
品牌 |
EA ELEKTRO-AUTOMATIK
|
型號 |
EA-EL 9080-170 B HP 2U
|
| 適用范圍 |
80 V, 170 A
|
電源名稱 |
直流電子負(fù)載
|
|
The EA-EL 9080-170 B HP 2U from EA Elektro-Automatik is a EA-EL 9000 B HP 2U series programmable electronic DC load. The electronic DC load of series EA-EL 9000 B HP 2U replace the ber series EA-EL 9000 HP and reduce the required unit height from ber minimum 3U to now only 2U. It supports the four common regulation modes constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR). The FPGA based control circuit provides interesting features such as a function generator with a table based function for the simulation of nonlinear internal resistances. The large colour TFT touch panel offers an intuitive kind of manual operation such as it is prolific nowadays with Smartphone or tablet computers. In parallel operation of multiple devices a master-slave bus is used to b the units to a bigger system where the actual values are totalled and the set values distributed.
- Multilingual (German, English, Russian, Chinese) colour touch panel with graphics display
- User profiles, true function generator
- Adjustable protections such as OVP, OCP, OPP
- Galvanically isolated interfaces (analogue and USB)
- SCPI & ModBus supported, ambient temperature range from 0 to 50°C, 80W (max) power consumption
- LabView VIs and remote control software (Windows)
- AC b, voltage of 90 to 264V, frequency of 45 to 66Hz, >0.99 power factor correction (PFC)
- 0 to 2400W output power, 0 to 2000W output power at 40°C, 0 to 80V output voltage
- 0 to 170A output current, 0.045 to 15ohm output resistance, ~ 2.2V UMin for Imax
- Dimensions is 19" x 2 HE/U x 464mm (W x H x D), 13Kg weight
