機器介紹

本機為雙輥式水磨砂光機，借助噴水裝置和水循環系統，采用濕法砂光，對金屬類和石材表面進行拉絲拋光處理。采用特殊材料及工藝制作的軟性膠輥，研磨砂光力度容易控制，精確度高，性能穩定。光電元件、擺動氣缸、電器件、軸承等都經過防水、防銹處理，使用壽命更高。裝有過載、氣壓過低、漏電、跑帶、缺相等保護，以上任何一種出現故障，設備都會自動停止，并緊急制動，保證生產安全。

This machine is a double-roller water-grinding sander, with the help of water-jet device and water circulation system, it adopts wet sanding to brushed and polished bl type and stone surface. The soft rubber roller made by special material and process, the grinding and sanding strength is easy to control, high precision and stable perbance. Optical components, oscillating cylinders, electrical parts, bearings, etc. are treated with water-proof and rust-proof, with higher service life. Equipped with protection for overload, low air pressure, leakage, running belt and lack of equation, if any of the above fails, the equipment will automatically stop and emergency brake to ensure production safety.

技術優勢

（1）工件加工過程中不變形；

（2）吸收磨削粉塵；

（3）耗材使用壽命更長；

（4）工件表面光潔度更高。

Technical advantages

(1) No debation of the workpiece during machining.

(2) All grinding dust is absorbed.

(3) Longer service life of consumables.

(4) Higher surface finish of the workpiece.

結構配置

1.自動測量進料厚度，工作臺自動讀取所測量厚度值并升降到對應位置

2.軸承、光電等主要部位采取防水處理，延長設備使用壽命

3.雙輥采用不同硬度的偏心膠輥，調整更方便

4.雙輥及多輥軸設計，實現單面一次進料，砂出成品

5.大功率電機，動力足，不卡機，不易損壞板材

6.減速機用變頻調速，既保護電機，還可靈活靈活調整進料速度。

Structure configuration

1. Automatically measure the thickness of the feed material, the table automatically reads the measured thickness value and lifts to the corresponding b

2. The main parts such as bearings and photoelectricity are treated with waterproof to prolong the service life of the equipment.

3. Double rollers adopt eccentric rubber rollers of different hardness, which is more convenient to adjust.

4. Double rollers and multi-roller shaft design, to achieve a single side of the material, sand out of the finished product

5. High power motor, sufficient power, no jamming, not easy to damage the plate

6. Frequency conversion speed control for reducer, which not only protects the motor, but also can adjust the feeding speed flexibly.